The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares T5 SP II Spada 3 Mille GT Strada 100 Brakes

Sort by Title

Sort by Price

Page 4 of 9

1 2 3 4 5 6 7 8 9

Brake Master Cylinder PS13 Front Brembo Overhaul Kit

BRA28659 Fits Cali 1100 (1994-1997), Cali EV (1997-2002), Cali Jackal, Cali Stone, Cali 3, Mille GT, Nevada 350, Nevada 750 (1991-2001), Spada 3, Le Mans 1000, 1000S, Strada 750, 750 Targa, Mille GT, V65 Florida, V75 PA

Dimensions:
Hollow piston 13mm OD x 38mm

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

part in stock 3 in stock

Also fits Cagiva Elefant E750, Ducati 748

£26.00

INC VAT

£21.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Bolt Kit Rear Brake Master Cylinder PS15

BRA14450 Fits S3, Convert, G5, Cali 2, Cali 3, Cali 1100 (1994-1998), Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT, Le Mans 1, 1000 SP, Spada 3, T3, T4, T5

Bolt kit containing the mounting and pivot bolts for PS 15 rear brake master cylinders

Also known as Guzzi ref. 17667150, 18659450

variable availability Availability varies on this part, check availability

14659450 GU14659450 14 65 94 50
1465 9450 1465.9450 14.65.94.50

£25.00

INC VAT

£20.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads EBC FA018HH

BRA58724 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Pair of EBC FA018HH double-H sintered brake pads for P2 F08 (P8) calipers, best suited for fast road use. These give better braking but will wear brake discs more quickly than standard EBC pads

For P2 F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers.
With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round

part in stock 4 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£24.80

INC VAT

£20.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Universal Brake Light Switch Double Banjo Fine Thread Stainless Steel

BRA01003 Universal Part

Dimensions:
M10 double banjo fine thread

Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder

Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'

part in stock 1 in stock

£24.50

INC VAT

£20.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Fine Thread

ELA07116 Fits Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, T5, 1000S, 1000 SP, SP II, Spada 3, G5, Convert, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, Mille GT, Nevada 350, Nevada 750 (1991-2003), V65 Florida, 750SP, Strada 750, 750T, 750 Targa

Dimensions:
M10 fine thread

Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

part in stock 5 in stock

79654116 GU79654116 79 65 41 16
7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport Köwe, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS Köwe, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

£21.40

INC VAT

£17.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Banjo Bolt Kit M10 With Bleed Nipple

BRA01006 Universal Part

Dimensions:
M10 x 1

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

part in stock More than 5 in stock

Also fits Benelli 250 TS

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Banjo Brake Light Switch Fine Thread

ELA14959 Fits 1100 Sport ALL, Centauro, Daytona (1991-1996), V11 Sport, V35 I, V35 II, V35 3, V35 Florida, V35C, V50 I, V50 II, V50C, V50 3, Monza, V65, V65 Florida, V65 GT, Lario, Quota ALL, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, SP II, Spada 3, S3, T3, T4, T5, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Strada 1000, Nevada 750 (1991-2003)

Dimensions:
M10 x 1 x 17mm bolt, 18mm from end to underside of bolt head

Brakelight switch banjo bolt

See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14657959 GU14657959 14 65 79 59
1465 7959 1465.7959 14.65.79.59

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper P08/F08 Pad Pin Kit

BRA54721A Fits G5, Convert, Cali 2, Cali 3, Cali 1100 (1994-1997), Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Spada ALL, T3, T4, T5, Mille GT

Dimensions:
Long pin 62mm x 6mm

Pad pin kit for Brembo P2 F08 (P8) calipers, consists of two long pins, one short and retaining spring.

replaces old Guzzi part ref. 14659100. Brembo ref. 120274210. NB finish on long pins may be zinc or black

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14659100 GU14659100 14 65 91 00
1465 9100 1465.9100 14.65.91.00

£19.85

INC VAT

£16.54 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake pads Ferodo FDB148

BRA14148 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Pair of Ferodo high performance brake pads FDB148, asbestos free and made in the UK

For P08/F08 calipers. Front and rear pads for all models except P9 equipped 1000 SP where these are only for front calipers
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors Highest friction level available for motorcycle racing Developed by world champions for future world champions Stable friction level achieving excellent modulation Fast bedding-in period Applications to fit all major racing calipers Suitable for stainless steel and cast iron discs

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£19.80

INC VAT

£16.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads EBC FA018

BRA54724 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Dimensions:
55.7 x 55 x9mm

Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

part in stock 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

£19.30

INC VAT

£16.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 4 of 9

1 2 3 4 5 6 7 8 9